Serving the Savannah area  ·  (912) 468-1649  ·  Open Mon-Sun 7am-7pm
📞 (912) 468-1649 Free Quote

Metal Roofing in Savannah, GA (31401) · Local Professionals

Savannah Metal Roofing · Fast response in Savannah and the Savannah area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+222Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Savannah's Historic District is full of 1800s gray brick row houses with low hipped roofs, and the Victorian District's steep gables and porches sit under live oaks draped in Spanish moss. Out on Tybee Island and the Isle of Hope, raised Lowcountry cottages with deep porches still wear tin and metal roofs that have seen decades of salt air and hurricane season.

Homeowners in 31401 call Savannah Metal Roofing because we understand how salt-laden humidity, intense summer UV, and violent afternoon thunderstorms treat a roof here. From the squares of the Historic District to the Craftsman bungalows around Forsyth Park, we install and repair metal roofs built for this coast.

Metal Roofing in Savannah (31401)

Savannah sits on a low sandy bluff above the Savannah River, surrounded by tidal marsh and creeks. That means drainage matters as much as the roof itself: heavy afternoon thunderstorms send water off steep Victorian gables and low hipped row house roofs alike, and the sandy soil can shift under downspouts and gutters. In Ardsley Park and Midtown, 1920s Craftsman bungalows often have tight lot lines and mature oaks whose limbs drop debris that holds moisture against panels. Historic District homes may need design review before changing panel profile or color, and homes on Tybee and Wilmington Island face salt air that eats at fasteners and flashing. We work with all of it, from corrugated panels on Effingham County barns to standing seam on Pooler subdivision homes.

Our team has installed, repaired, and replaced metal roofs across Savannah and the surrounding areas, from the Victorian District to Windsor Forest and down to Richmond Hill. We know which fasteners hold up in coastal humidity and how to flash a chimney on a 100-year-old brick row house without creating new leaks.

Our services in Savannah

How a Job Works in Savannah

Step 1: Call us at (912) 468-1649 or request a free estimate online. We schedule an on-site assessment, inspect your roof and attic, and talk through options like standing seam, metal shingles, or a retrofit over existing shingles. We check for active leaks, failed fasteners, and flashing gaps, and we document everything for your insurance claim if storm damage is involved.

Step 2: Once you approve the scope and price, we pull the required roofing permit through the City of Savannah and coordinate any historic district or HOA design review. On tight lots in the Victorian District or under low-hanging oaks in Ardsley Park, we plan material staging and access carefully so we do not damage landscaping or block neighbors. Installation typically takes one to three days depending on roof size and complexity.

Step 3: We clean up every day and do a final walkthrough with you. We haul away old materials, check gutters and downspouts, and make sure you know how to care for your new metal roof. We leave your property clean and your roof watertight.

Pricing in Savannah depends on roof size, pitch, access, and condition. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a retrofit over shingles at $7. Metal roof repair and leak repair start at $450, screw replacement and re-fastening at $750, and flashing, chimney, or skylight repair at $600. Coating and painting starts at $2.50 per square foot, and gutters for metal roofs start at $9 per linear foot. Storm and wind damage inspections are free. For a precise number on your Savannah home, call (912) 468-1649 for a free estimate.

My 1920s bungalow in Ardsley Park has a low-pitch roof and big oak trees overhead. What metal roof works best?
Low-pitch roofs in Ardsley Park often do well with standing seam because the raised seams shed debris and water better than exposed fasteners. We also check your attic ventilation and trim back overhanging limbs where possible, since oak debris holding moisture is a common cause of premature fastener failure here.
A tropical storm just peeled back panels on my roof near Tybee Island. How fast can you respond?
We prioritize active leaks and wind damage after storms. Call (912) 468-1649 and we will schedule an inspection, usually within 24 to 48 hours depending on volume. We can tarp and secure the roof to prevent further water intrusion, then document the damage for your insurance claim.
What does a typical metal roof replacement cost for a 1,500-square-foot ranch in Windsor Forest?
For a ranch that size with a standard pitch and good access, a metal roof replacement often falls in the range of $9 to $14 per square foot installed, so roughly $13,500 to $21,000 depending on panel type, tear-off, and flashing details. Standing seam runs higher than corrugated or ribbed panels. We give a firm quote after inspecting the roof.
Do I need a permit to replace my roof in Savannah, and does the Historic District have extra rules?
Yes, a roofing permit is commonly required for a full replacement or re-roof in Savannah and Chatham County, and fees and inspection requirements vary. If you are in the Historic District, design review may restrict panel profile and color. Check the City of Savannah website for current rules or call the building department, and we can help coordinate the paperwork.
My neighbor's oak tree drops limbs on my roof, and our HOA wants a specific metal color. Can you help?
We can install any panel profile and color your HOA approves, and we will provide product samples and documentation for HOA review. For tree limbs crossing the property line, that is a civil matter between neighbors, but we can trim back limbs that overhang your roof during installation if you have permission or the limbs are on your side.
Are you fully insured for work on my Savannah property?
Yes, Savannah Metal Roofing is fully insured with general liability and workers' compensation coverage.
What maintenance does a metal roof need in Savannah's humidity and summer heat?
Check fasteners and seams annually, especially after hurricane season, and keep gutters clear of oak leaves and pine needles. Salt air near the islands can corrode fasteners over time, so we recommend an inspection every couple of years. A coating can extend the life of older panels and help with UV and heat.
Why choose us?

Trusted professionals in Savannah

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Savannah

All your work handled by qualified professionals in Savannah

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

222+ Verified Client Reviews in Savannah

⭐⭐⭐⭐⭐ 4.9/5 · 222 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Savannah · Response within 24h · No commitment · ☎ (912) 468-1649

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Savannah ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm