Serving the Savannah area  ·  (912) 468-1649  ·  Open Mon-Sun 7am-7pm
📞 (912) 468-1649 Free Quote

Metal Roofing in Rincon, GA (31326) · Local Professionals

Savannah Metal Roofing · Fast response in Rincon and the Savannah area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+222Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Rincon sits just up the road from Savannah, where the lots get a little wider and the pines and oaks crowd the property lines. Most homes here are 1990s to 2020s brick and siding subdivisions off Highway 21, with a mix of farm-edge places and metal shops and barns out toward the county line. If your shingle roof has been baking in the Lowcountry sun and taking hits from afternoon storms, we can help.

Homeowners in Rincon (31326) call Savannah Metal Roofing because we know how wind and heat punish roofs along the Highway 21 corridor and near the recreation fields at Macomber Park. We install, repair, and replace metal roofs built for this climate, and we are fully insured with general liability and workers' compensation.

Metal Roofing in Rincon (31326)

Rincon is not the Historic District, and that changes the work. Most properties here are single-family homes on quarter-acre to one-acre lots, often with a driveway on one side and a fence on the other, so staging a roof replacement means planning where the dumpster goes and how the crew gets panels to the ridge without trampling your landscaping. The ground is sandy and drains fast, but summer thunderstorms still dump a lot of water in a short time, so we pay close attention to flashing at chimneys, valleys, and wall intersections. Many homes here have mature pines and live oaks close enough to drop debris on the roof, which is why we often find clogged valleys and moisture-holding piles of needles on shingle roofs that are ready for replacement.

We have worked across Rincon and the surrounding Savannah area, from the older places near the center of town to the newer subdivisions off Fort Howard Road and Goshen Road. Whether you need a full metal roof replacement, a retrofit over existing shingles, or a repair after a storm, our team knows the local building stock and the wind and heat that come with it.

Our services in Rincon

How a Job Works in Rincon

Step 1: You call us at (912) 468-1649 or request a free estimate online. We schedule a time to come out, walk your roof and property, and talk through what you are seeing. We check the attic if accessible, look at fasteners and flashing, and give you a written scope with pricing before any work begins.

Step 2: Once you approve, we pull the required roofing permit through the local building department and schedule the work. In Rincon, that often means coordinating with an HOA on panel profile and color if your subdivision has design rules. On tight lots, we plan panel delivery and staging so we do not block your neighbor's driveway or damage your fence. For replacements, we tear off the old roof, inspect the decking, and install the new metal roof with new underlayment and fasteners rated for this climate.

Step 3: We clean up every day and do a final walkthrough with you. We use magnets to pick up screws and nails, haul away all debris, and make sure you know how the new roof drains and what to watch for. We leave your property clean and your roof ready for the next storm season.

Pricing in Rincon depends on the size and pitch of your roof, how many layers are currently on it, access around the house, and whether there is any decking damage. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. A retrofit over existing shingles starts at $7 per square foot, and corrugated and ribbed panel roofing starts at $5.50 per square foot, which is common on shops and barns out toward the county line. Repairs and leak repairs start at $450, screw replacement and re-fastening at $750, and flashing, chimney, and skylight repair at $600. We give free estimates and inspections, so call (912) 468-1649 to get a real number for your property.

My Rincon subdivision has an HOA. Can I still get a metal roof?
Yes, but you will likely need approval first. Many HOAs in Rincon restrict panel profile and color, and some require a sample or rendering. We can provide product specs and color samples to submit with your application, and we recommend getting written approval before we order materials.
How fast can you respond to storm damage in Rincon?
We prioritize active leaks and storm damage. Call (912) 468-1649 and we will schedule an inspection as soon as possible, often the same day or next day depending on the season. We can tarp or make temporary repairs to stop water intrusion while we prepare a permanent fix.
What does a metal roof replacement cost for a typical Rincon home?
For a typical single-story Rincon home, a metal roof replacement often falls in the range of $9 per square foot and up, depending on roof size, pitch, and whether decking needs repair. A free estimate will give you an exact price for your house.
Do I need a permit for a metal roof in Rincon?
Yes, a full replacement or re-roof typically requires a permit from the local building department. Requirements and fees can vary, so we confirm the current rules with the jurisdiction before starting and handle the permit as part of the job.
My neighbor's trees drop limbs on my roof. What are my options if a limb damages my metal roof?
If a limb punctures or dents your metal roof, we can inspect and repair it, and we document the damage for your insurance claim. Property line disputes are a civil matter, but we can help you understand the damage and make the repair. We never promise insurance coverage, but we provide the documentation you need.
Are you insured for work at my Rincon property?
Yes, we are fully insured with general liability and workers' compensation.
What maintenance does a metal roof need in Rincon?
In Rincon, the main maintenance is keeping valleys and gutters clear of pine needles and oak debris, especially before hurricane season. We recommend an annual inspection to check fasteners and flashing, and we offer maintenance plans and coating services to extend the life of your roof.
Why choose us?

Trusted professionals in Savannah

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Savannah

All your work handled by qualified professionals in Savannah

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

222+ Verified Client Reviews in Savannah

⭐⭐⭐⭐⭐ 4.9/5 · 222 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Savannah · Response within 24h · No commitment · ☎ (912) 468-1649

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Savannah ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm