Serving the Savannah area  ·  (912) 468-1649  ·  Open Mon-Sun 7am-7pm
📞 (912) 468-1649 Free Quote

Metal Roofing in Garden City, GA (31408) · Local Professionals

Savannah Metal Roofing · Fast response in Garden City and the Savannah area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+222Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Garden City is a small, hardworking city tucked between Savannah and the port, where 1950s to 1970s brick ranches and modest commercial buildings sit under tall pines and live oaks. The lots are tight, the sun is brutal, and the afternoon storms roll in off the marsh like clockwork. If your roof is showing its age, we can help.

Homeowners and property managers in Garden City (31408) call Savannah Metal Roofing because we know this housing stock inside and out. From the brick ranches off Highway 21 to the shops along Dean Forest Road, we have seen what decades of sun, humidity, and pine debris do to a shingle roof. We offer honest assessments and metal roofing solutions built for this climate.

Metal Roofing in Garden City (31408)

Garden City sits on flat, sandy ground with a high water table, and many of the older homes here have shallow roof pitches that were designed for shingles, not for the wind-driven rain we get during hurricane season. The tight spacing between houses means access can be tricky, and we often have to stage materials carefully to avoid damaging fences, driveways, or the mature pines that shade these properties. The heat and UV exposure here are relentless, and we regularly find shingles that are brittle, curled, and missing granules after 15 to 20 years. Metal roofing, especially standing seam and 5V-crimp panels, handles that punishment far better, and it sheds the pine straw and oak debris that otherwise traps moisture and rots decking.

Our team has worked on everything from small repair jobs on brick ranches near Groves High School to full replacements on commercial buildings along the Highway 80 corridor. We understand the local building department requirements and can help you navigate permit thresholds for re-roofs and retrofits.

Our services in Garden City

How a Job Works in Garden City

Step 1: It starts with a phone call to (912) 468-1649 or a request through our website. We schedule a free on-site assessment at your Garden City property, usually within a day or two. We inspect the roof, check the attic if accessible, and talk with you about what you are seeing, whether it is a leak, storm damage, or just an aging roof. You get a written estimate with clear pricing before any work begins.

Step 2: Once you approve, we pull the required permits from the City of Garden City and schedule the work. For a metal roof over shingles, we verify that the existing layers are within code limits and that the decking is sound. On tight lots, we plan material delivery and staging to keep driveways clear and neighbors happy. If your home is in an HOA or a historic district, we help you submit the necessary paperwork for panel profile and color approval.

Step 3: When the job is done, we walk the property with you, magnet-sweep for nails, and haul away all debris. We do not leave until you are satisfied and the site is clean.

Pricing for metal roofing in Garden City depends on the size and pitch of your roof, the condition of the decking, access, and the material you choose. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you are retrofitting over existing shingles, that starts at $7 per square foot. Common repairs like leak fixes start at $450, and screw replacement or re-fastening starts at $750. We always provide a free estimate so you know exactly what to expect before we start. Call (912) 468-1649 to schedule yours.

My 1960s brick ranch off Dean Forest Road has two layers of shingles. Can you install metal over them?
Possibly, but it depends on the condition of those layers and local code limits on the number of existing roofs. We inspect the decking and verify the layers during our free estimate. If a tear-off is required, we will explain why and give you a clear price for both options.
A storm just peeled back some panels on my roof near the Highway 21 interchange. How fast can you get out?
We prioritize active leaks and storm damage in Garden City. Call (912) 468-1649 and we will schedule an inspection, often the same day or next. We can tarp or secure the area to prevent further water intrusion and then provide a repair estimate.
What does a typical metal roof replacement cost for a 1,500 square foot ranch in Garden City?
For a standard 1,500 square foot ranch, a metal roof replacement typically ranges from $13,500 to $18,000 depending on the panel type, pitch, and whether any decking needs repair. Standing seam runs higher, while corrugated or ribbed panels are more economical. We give you a detailed, itemized estimate for free.
Do I need a permit from the City of Garden City to replace my roof?
Yes, a roofing permit is generally required for a full replacement or re-roof in Garden City. The exact thresholds and fees are set by the city, and we verify the current requirements with the building department before starting any job. We handle the permit application and inspections as part of our service.
My neighbor's oak tree drops limbs on my roof. What are my rights if a limb damages my metal roof?
In Georgia, a tree limb that falls from a neighbor's property onto your roof is generally your responsibility to clean up and repair, unless the tree was known to be diseased or hazardous and the neighbor was negligent. We recommend documenting the damage and contacting your insurance. We can provide a repair estimate and work with your adjuster.
Are you fully insured for roofing work in Garden City?
Yes, Savannah Metal Roofing is fully insured with general liability and workers' compensation coverage.
What maintenance does a metal roof need in Garden City's climate?
Metal roofs are low maintenance, but in Garden City's humid, storm-prone climate, we recommend an annual inspection to check fasteners, seams, and flashing. Keep pine straw and oak debris off the roof, especially in valleys, and make sure gutters are clear. We offer free inspections to catch small issues before they become leaks.
Why choose us?

Trusted professionals in Savannah

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Savannah

All your work handled by qualified professionals in Savannah

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

222+ Verified Client Reviews in Savannah

⭐⭐⭐⭐⭐ 4.9/5 · 222 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Savannah · Response within 24h · No commitment · ☎ (912) 468-1649

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Savannah ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm