Serving the Savannah area  ·  (912) 468-1649  ·  Open Mon-Sun 7am-7pm
📞 (912) 468-1649 Free Quote

Metal Roofing in Bloomingdale, GA (31302) · Local Professionals

Savannah Metal Roofing · Fast response in Bloomingdale and the Savannah area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+222Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Bloomingdale is the kind of town where the pines meet the pavement, and most homes sit on generous, sandy lots with a garage, a shed, and a few live oaks shading the roof. You will see everything from 1970s brick ranches to newer builds off Highway 80, and a whole lot of metal barns and carports tucked behind the main roads. It is a straight shot down Highway 80 to Savannah, but the weather here still hits roofs hard with summer storms, pine straw, and the occasional limb.

That is why homeowners in Bloomingdale (31302) call Savannah Metal Roofing. We know how pine debris piles up in valleys and behind chimneys, and we have spent years fixing the leaks and wind damage that come with it. Whether you are near the Bloomingdale Elementary School or out toward the county line, we treat your roof like it is on our own street.

Metal Roofing in Bloomingdale (31302)

Bloomingdale lots are typically larger than what you find in downtown Savannah, with sandy soil that drains fast but also shifts a bit under heavy rain. Many properties have mature pines and oaks that drop needles and limbs year round, and those debris piles hold moisture against shingles and metal seams. We often find rusted fasteners and clogged gutters on older roofs, especially where trees overhang. Access can be tight on some of the smaller streets off Highway 80, but most driveways give us room to stage materials and a dumpster without blocking neighbors.

Our team has worked on everything from corrugated panel roofs on shops and barns to standing seam on newer homes. We know the local building department and what it takes to get a permit pulled and inspections scheduled without holding up your project. When we say we serve Bloomingdale and the surrounding Savannah area, we mean it, from the older ranches near the fire station to the new construction out toward Pooler.

Our services in Bloomingdale

How a Job Works in Bloomingdale

Step 1: You call us at (912) 468-1649 or fill out the form, and we set up a free on-site assessment. We walk the roof, check the attic if accessible, and look at flashing, fasteners, and gutters. You get a written estimate with options, no pressure and no surprises.

Step 2: Once you approve, we pull the permit if needed and schedule the work. On many Bloomingdale homes we can install a metal roof over your existing shingles (retrofit) if the deck is solid and code allows, which saves time and disposal costs. We protect your landscaping and keep the job site tidy, especially on lots with tight driveways or mature trees.

Step 3: After the install, we do a full cleanup, magnet sweep for nails, and a final walkthrough with you. We make sure you know how the new roof works, what to expect, and how to maintain it. We leave your property clean and your roof ready for the next storm.

Pricing in Bloomingdale depends on the size and pitch of your roof, the material you choose, and how much prep work is needed. For a typical ranch home, metal roof installation starts around $8 per square foot, and a metal roof over shingles (retrofit) starts at $7 per square foot. Standing seam runs about $10 per square foot, and corrugated panel roofing starts at $5.50 per square foot. Repairs like leak fixes start at $450, and screw replacement or re-fastening starts at $750. Gutters for metal roofs start at $9 per linear foot. We give you a clear, written estimate after we see your roof, and we stand by our work. Call (912) 468-1649 for a free estimate.

My Bloomingdale roof is covered in pine needles and I see rust spots. Can you repair it or do I need a full replacement?
Pine needles hold moisture and can cause rust on metal panels, especially at seams and fasteners. We inspect the extent of the rust and check for soft spots in the decking. If the rust is surface-level, we can often clean and coat it, but if panels are perforated or seams are failing, replacement may be the better long-term fix. We will give you honest options.
A storm just knocked a limb onto my roof in Bloomingdale. How fast can you get out to check for damage?
We offer free storm and wind damage inspections and prioritize active leaks. Call us at (912) 468-1649 and we will schedule a visit as soon as possible, usually within a day or two depending on demand. We can tarp active leaks to prevent further damage while you wait for repairs.
What does a metal roof over shingles cost for a typical Bloomingdale ranch home?
For a ranch home, metal roof over shingles starts at $7 per square foot, but the final price depends on roof size, pitch, and whether any decking needs repair. We measure your roof and give you a written estimate before any work begins. Call (912) 468-1649 to set up a free assessment.
Do I need a permit to replace my roof in Bloomingdale, and can you handle it?
Yes, the City of Bloomingdale generally requires a permit for a full roof replacement, and the requirements can vary. We pull the permit for you and coordinate with the local building department to make sure the work meets code and passes inspection. We will explain the process and keep you updated.
My neighbor's tree hangs over my roof in Bloomingdale. What can I do about limbs and debris?
Property line issues are common in Bloomingdale, and the general rule is that you can trim branches that overhang your property, but you should not damage the tree or trespass. We recommend talking with your neighbor first. If debris is causing roof damage, we can install gutter guards or adjust flashing to reduce the problem. For HOA communities, check your covenants for any restrictions.
Are you insured for roofing work in Bloomingdale?
Yes, we are fully insured with general liability and workers' compensation coverage.
What maintenance should I do on my metal roof in Bloomingdale to prevent leaks?
Keep gutters and valleys clear of pine needles and leaves, especially after storms. Check for loose or backed-out screws once a year and look for signs of rust or sealant wear around flashing and penetrations. We offer inspections and maintenance plans to catch small issues before they become leaks.
Why choose us?

Trusted professionals in Savannah

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Savannah

All your work handled by qualified professionals in Savannah

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

222+ Verified Client Reviews in Savannah

⭐⭐⭐⭐⭐ 4.9/5 · 222 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Savannah · Response within 24h · No commitment · ☎ (912) 468-1649

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Savannah ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm