Licensed & Insured, in Savannah and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Savannah
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (912) 468-1649 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Savannah and surrounding areas · On-site visits included · Free estimate within 24h
Savannah Metal Roofing is a team of local certified professionals based in Savannah. We respond quickly in Savannah and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (912) 468-1649⭐⭐⭐⭐⭐ 4.9/5 · 222 verified Google reviews
“We had a small old shed torn down and the crew hauled off every bit of debris the same day. They then replaced the rusted panels on our back porch roof with new ribbed metal, and the cleanup was spotless. Honestly didn't expect it done that fast.”
Metal Roof Replacement
“They built out a beautiful copper awning over our front entry and the soldering on the flashing is flawless. Two guys, two days, and the copper finish matches the porch lanterns perfectly. My neighbors keep asking who did it.”
Copper & Specialty Metal Roofing
“Our old hay barn needed a whole new metal roof and these folks knocked out the 60x40 span in three days. Straight lines, tight screws, no leaks after the first big storm. Fair price for agricultural work too.”
Commercial & Agricultural Metal Roofing
“Put a standing seam roof on our brick ranch house and it completely changed the look. The crew of four was respectful, kept the yard clean, and finished in under a week. Only small gripe is they started a day late, but the result is gorgeous.”
Standing Seam Metal Roofing
“Had a leak around our roof vent that two other guys couldn't find. Savannah Metal Roofing traced it to bad flashing, sealed it up, and re-fastened a few loose panels while they were at it. No more drips in the hallway ceiling.”
Metal Roof Repair
“Brand new metal roof on our house and I'm honestly relieved. They walked me through panel options, showed up when they said, and the cleanup was so good you couldn't tell a crew had been here. Three days start to finish.”
Metal Roof Installation
“We retrofitted our wood-frame house with metal over the old shingles and saved a ton versus a full tear-off. The crew measured everything carefully so the panels lined up right over the existing deck. Really impressed with how tidy they kept the site.”
Metal Roof Over Shingles (Retrofit)
“Our back terrace roof was leaking where it meets the chimney, and they re-flashed the whole junction plus replaced a couple of corroded panels. Took a day and a half. Wish they'd given a little more notice before showing up, but the work itself is solid.”
Flashing, Chimney & Skylight RepairReal photos of our work in Savannah · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed fastener panel installation | Starting at $8/sq ft | Includes tear-off, synthetic underlayment, panels and fasteners on a simple gable roof with standard access. |
| Standing seam installation | Starting at $12/sq ft | Concealed fasteners, raised seams and full flashing detail for coastal wind and salt-air exposure. |
| Metal shingle or stone-coated steel | Starting at $11/sq ft | Includes stamped or granular panels and trim; steeper pitches and multiple valleys raise the rate. |
| Complex or large-scale job | On estimate | Steep gables, multiple penetrations, historic review or heavy deck repair need an on-site look first. |
| Travel | Included | In Savannah and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (912) 468-1649, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Snap-lock standing seam | Starting at $10/sq ft | Includes panels, concealed clips, underlayment and standard trim on a sound deck. |
| Mechanically seamed panel | Starting at $13/sq ft | Includes double-fold seaming, high-wind clips and heavier gauge for coastal exposure. |
| Tear-off and deck repair | Quoted per job | Includes removing old roofing, replacing soft sheathing and correcting ventilation before panels go on. |
| Historic or complex roof | On estimate | Steep gables, multiple valleys and design review need an on-site look before a number is given. |
| Travel | Included | In Savannah and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (912) 468-1649, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed fastener replacement (5V-crimp or corrugated) | Starting at $9/sq ft | Full tear-off, decking inspection, underlayment, and new ribbed panels with screws. |
| Standing seam replacement | Starting at $14/sq ft | Concealed fasteners, raised seams, premium trim, and manufacturer wind warranty. |
| Metal shingle or stone-coated steel | Starting at $13/sq ft | Stamped or granule-coated panels, historic profile options, and full flashing package. |
| Copper and specialty metal | On estimate | Soldered seams, custom trim, and patina work need an on-site look before pricing. |
| Travel | Included | in Savannah and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (912) 468-1649, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Retrofit over existing shingles, exposed fastener | Starting at $7/sq ft | Includes slip sheet, purlins, panels, and trim, with deck repairs priced separately. |
| Retrofit over existing shingles, standing seam | Starting at $11/sq ft | Concealed fasteners and custom panel lengths, priced higher for complex hips and valleys. |
| Metal shingle or stone-coated steel retrofit | Starting at $13/sq ft | Includes textured panels and reinforced fastening, with historic or HOA review adding cost. |
| Deck repair and replacement | On estimate | Soft sheathing and rot found during inspection, priced per square foot before work begins. |
| Travel | Included | In Savannah and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (912) 468-1649, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor repair (fasteners, seam reseal, pipe boot) | Starting at $450 | Includes replacing failed fasteners or resealing a seam; price rises with roof pitch and access difficulty. |
| Panel replacement (single panel) | Starting at $650 | Covers removing and matching one damaged panel; cost moves with panel profile and gauge availability. |
| Flashing and penetration repair | Starting at $550 | Rebuilds chimney, skylight, or vent flashing; historic or complex details push the price higher. |
| Storm damage repair | On estimate | Multiple panels, widespread fastener failure, or insurance documentation requires an on-site inspection first. |
| Travel | Included | in Savannah and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (912) 468-1649, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Targeted leak repair (single point) | Starting at $450 | Includes inspection, leak tracing, and repair of one failed boot, fastener cluster, or short seam section. |
| Flashing rebuild (chimney, skylight, wall) | Starting at $750 | Covers removal of failed flashing, new underlayment, and formed metal counter-flashing at the transition. |
| Widespread fastener and seam service | Starting at $1,200 | Priced by roof size and count of failed fasteners or separated seams across the affected slopes. |
| Emergency tarp and storm stabilization | Starting at $550 | After-hours or storm response to stop active water intrusion until permanent repairs are scheduled. |
| Complex or large-scale repair | On estimate | Multi-level access, panel section replacement, or historic district staging all require an on-site look first. |
| Estimate | Free | Free written estimate with photos, response within 24 hours at (912) 468-1649, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Small repair (single plane) | Starting at $750 | Covers a modest number of failed fasteners on one accessible roof plane, including new screws and washers. |
| Partial re-fastening | Starting at $1,400 | Multiple planes with widespread backing-out; price moves with square footage and fastener count. |
| Full roof re-fastening | On estimate | Every fastener replaced on older exposed-fastener or tin roofs; needs an on-site count and panel inspection. |
| Panel replacement (add-on) | On estimate | When corrosion has eaten the metal around the screws and re-fastening alone will not hold. |
| Travel | Included | In Savannah and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (912) 468-1649, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel roof installation | Starting at $5.50/sq ft | Includes panels, underlayment, fasteners and basic trim; pitch and roof size move the price. |
| Ribbed R-panel or 5V crimp roof | Starting at $6.25/sq ft | Includes panel layout, closures and ridge caps; steep pitch or complex valleys add labor. |
| Re-fastening and screw replacement | Starting at $450 | Includes new screws, washers and spot sealing; rusted or stripped fasteners raise the count. |
| Complex or large-scale job | On estimate | Historic review, steep access, multiple valleys or full tear-off need an on-site look first. |
| Travel | Included | In Savannah and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (912) 468-1649, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Architectural shingle profile metal roof | Starting at $9/sq ft | Installed with underlayment and flashing; pitch and roof complexity move the price up. |
| Slate or shake profile metal roof | Starting at $11/sq ft | Premium textured profiles for historic and design-review homes; steeper gables and dormers add labor. |
| Full tear-off and re-deck | On estimate | Needed when sheathing is soft or multiple layers exist; requires an on-site look before pricing. |
| Retrofit over existing shingles | On estimate | Allowed only when code and deck condition permit; we verify before quoting a recover. |
| Travel | Included | In Savannah and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (912) 468-1649, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard stone-coated steel system | Starting at $9/sq ft | Includes tear-off, synthetic underlayment, panels, and standard flashing; pitch and roof complexity move the price. |
| Retrofit over one shingle layer | Starting at $7/sq ft | Covers the sound existing layer where code allows; deck condition and panel profile change the final number. |
| Historic or HOA design review | On estimate | Profile matching and approval paperwork add scope; the roof needs an on-site look before pricing. |
| Complex roof with valleys and chimneys | On estimate | Multiple flashing details and steep gables require a measured takeoff, not a square-foot guess. |
| Travel | Included | In Savannah and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (912) 468-1649, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper accent roof (porch, bay window, dormer) | Starting at $20/sq ft | Includes custom-fabricated copper pans, soldered seams, and new underlayment; access and soldering detail move the price. |
| Full architectural copper roof | Starting at $28/sq ft | Includes hand-formed pans, soldered valleys and flashing, and deck repair; roof height and historic profile drive cost. |
| Zinc or aluminum specialty roof | Starting at $18/sq ft | Includes zinc or aluminum panels, concealed fasteners, and flashing; salt exposure and panel profile affect the number. |
| Custom flashing and finial fabrication | On estimate | Shop-fabricated chimney flashing, valleys, and finials need an on-site look before we quote. |
| Travel | Included | in Savannah and surrounding Chatham, Effingham, and Bryan county areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (912) 468-1649, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Reflective coating on sound panels | Starting at $2.50/sq ft | Includes wash, degrease, and one reflective topcoat on panels with light chalking and no significant rust |
| Rust treatment and coating | Starting at $3.50/sq ft | Adds rust converter, spot priming at seams and fastener heads, and re-sealing before the topcoat goes down |
| Full restoration with elastomeric topcoat | Starting at $4.50/sq ft | Includes fastener re-seating, primer system, and flexible topcoat for panels that expand hard in summer heat |
| Complex or large-scale roof | On estimate | Steep pitches, heavy oak overhang, tight Historic District access, or commercial square footage need an on-site look first |
| Travel | Included | In Savannah and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (912) 468-1649, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single chimney flashing repair | Starting at $600 | Includes removing failed flashing and bending new step and counter-flashing to fit the brick. |
| Skylight curb re-flash | Starting at $750 | Covers curb flashing replacement and resealing; unit removal adds cost if the frame is rotted. |
| Valley or dormer transition repair | Starting at $900 | Includes opening the joint, replacing corroded metal and re-lapping panels over new flashing. |
| Multiple penetration package | On estimate | Chimney, skylights and valleys done together need an on-site look before we quote. |
| Travel | Included | In Savannah and surrounding areas, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (912) 468-1649, with no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Basic uplift package | Starting at $1,200 | Includes inspection, clip additions at ridge and eave, and fastener check on an accessible single-family roof. |
| Ridge and edge metal upgrade | Starting at $1,850 | Reinforced ridge caps and heavy edge metal, priced by linear footage and roof height. |
| Full fastener replacement | Starting at $2,400 | New screws with sealing washers across an exposed-fastener roof, including removal of backed-out screws. |
| Reflective heat-control finish | On estimate | Coating or finish upgrade for south and west slopes; needs an on-site look at panel condition and prep. |
| Complex or large-scale job | On estimate | Steep gables, tall raised cottages, multiple roof levels or historic-district review need an on-site scope. |
| Travel | Included | In Savannah and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (912) 468-1649, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Full roof and flashing inspection with photos and a written repair-versus-replacement assessment |
| Minor wind repair | Starting at $350 | Re-fastening, re-sealing, and resetting lifted panels on a small damaged area |
| Panel section replacement | Starting at $900 | Cut out and replace damaged panels, priced by panel count and profile availability |
| Flashing and penetration repair | Starting at $650 | Rebuild chimney, skylight, or pipe boot flashing that wind and rain worked loose |
| Widespread or structural damage | On estimate | Needs an on-site look to price deck repairs, panel runs, and possible full replacement |
| Travel | Included | In Savannah and surrounding areas, no separate call-out or mileage fee |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard residential inspection | Free estimate | Initial walk, verbal findings and scope, no charge and no obligation to book. |
| Full written report with photos | Starting at $250 | Photo documentation, fastener map and severity ratings; roof size and pitch move the price. |
| Pre-purchase or insurance package | Starting at $350 | Cost-to-cure notes or claim-ready damage map; number of flashings and penetrations drives cost. |
| Complex or historic roof | On estimate | Multi-gable, steep or fragile historic roofs need an on-site look before we quote. |
| Travel | Included | In Savannah and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (912) 468-1649, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless aluminum gutter, standard single-story run | Starting at $9/linear ft | Includes gutter, hidden hangers and standard downspouts on an accessible single-story metal roof. |
| Two-story or steep-pitch run | Starting at $14/linear ft | Adds ladder staging and fall protection for steep gables common on Victorian District homes. |
| Leaf protection for oak and pine debris | Starting at $4/linear ft | Guard and strainers sized for live oak leaves, pine needles and Spanish moss load. |
| Historic profile match (half-round or K-style) | On estimate | Needs an on-site look at the building era and design review requirements before pricing. |
| Travel | Included | In Savannah and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (912) 468-1649, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Repair and re-fastening | Free estimate | Covers screw replacement, panel patching, and flashing repair; cost rises with roof height and leak count |
| Exposed-fastener panel installation | Starting at $9 per sq ft | Includes panels, fasteners, closures, and trim; moves up with pitch and tear-off requirements |
| Standing seam installation | Starting at $14 per sq ft | Concealed fasteners, raised seams, and trim; price rises with insulation and complex roof geometry |
| Insulated or retrofit system | On estimate | Needs an on-site look for deck condition, condensation risk, and code limits on layers |
| Travel | Included | In Savannah and surrounding counties, no separate call-out or mileage fee |
| Estimate | Free | Response within 24 hours at (912) 468-1649, no obligation to book |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Savannah need a crew that understands what local roofs actually face: hurricane and tropical-storm wind, salt-laden humid air, intense summer UV, and heavy oak and pine debris that holds moisture on the roof. Savannah Metal Roofing is the local choice for metal roof installation, replacement, re-roof, and repair on homes across the city and surrounding areas. From the historic row houses and Victorian gables of the Historic District and Thomas Square to the Lowcountry cottages of Tybee Island, Wilmington Island, and the Isle of Hope, we match the system to the structure and the exposure.
Our network of licensed, insured local contractors also serves Garden City, Pooler, Port Wentworth, Richmond Hill, and the surrounding Chatham, Effingham, and Bryan county communities. Whether your roof is a steep-pitch Victorian, a low-slope townhouse, or an aging screw-down panel system, we start with a straight assessment and a clear recommendation. Call (912) 468-1649 or request a free estimate to get started.
Most metal roof leaks in Savannah trace back to a handful of predictable failures. On 15 to 30 year old exposed-fastener roofs, the number one cause is fasteners backing out as the EPDM sealing washers dry, shrink, and crack under UV and heat. Once the washer fails, water reaches the screw shank and the hole enlarges. Seam separation from thermal movement is another common source on standing seam and ribbed panels, especially where panels were installed without proper clip spacing or closure. Failed pipe boots and flashing at chimneys, skylights, and valleys let water slip behind the metal, and wind-lifted panels after a storm open the laps. Fallen oak and pine limbs puncture panels and crush ribs, and the debris that stays on the roof holds moisture against the surface.
Ignoring these failures gets expensive fast. Water tracks along purlins and decking far from the entry point, so a small leak at a fastener can rot sheathing several feet away and saturate insulation before a stain appears on the ceiling. That hidden damage is why we inspect the whole roof assembly, not just the wet spot. Our metal roof repair and metal roof leak repair services address the source, not just the symptom.
The honest repair-versus-replace call matters here. If the panels are sound and the leaks come from tired fasteners and worn sealant, a full screw replacement and re-fastening with new washered fasteners often restores a watertight roof for a fraction of replacement cost. If the metal is perforated, the seams are failing across the field, or the decking is soft, replacement is the better money. We tell you which one you are looking at. Call (912) 468-1649 to schedule an inspection.
We install the full range of metal systems and match the profile to the home, the pitch, and the budget. Standing Seam Metal Roofing is the premium choice: concealed clips, no exposed fasteners, and clean lines that suit everything from Historic District townhouses to Pooler subdivisions. Corrugated & Ribbed Panel Roofing is the economical workhorse for cabins, barns, carports, and workshops across Effingham and Bryan counties. We also install Metal Shingle Roofing, Stone-Coated Steel Roofing, and Copper & Specialty Metal Roofing for accents and historic profiles.
The honest comparison is simple: standing seam costs more up front but has no exposed screws to maintain, while screw-down costs less and needs its fasteners serviced over its life. When the deck is sound, Metal Roof Over Shingles (Retrofit) is a legitimate option that saves on tear-off and disposal. When the deck is soft or layered, tear-off and a full Metal Roof Replacement is the right call. We will tell you which applies to your roof.
Metal roof costs in Savannah are typically quoted per square foot for installations, while repairs are often flat-rate depending on scope. Price depends on the panel system and metal gauge, roof pitch and complexity, tear-off versus recover, decking condition, and access. Historic District and waterfront properties often carry extra labor for profile matching and staging. We frame all figures as typical ranges, and final pricing depends on the roof and site conditions. Some carriers may offer premium discounts for metal or impact-rated roofs, though that is never a guarantee.
For a closer look at how we structure estimates, see our pricing page, then request a free estimate or free roof inspection. We will give you a written scope and a clear recommendation, including whether a repair or coating is the smarter spend.
After a storm, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise that a claim will be approved. We document what we find and leave the coverage decision to the people who make it.
On permits, in most jurisdictions a permit is commonly required for a full replacement or re-roof, but requirements vary by city and county, and inspection thresholds differ. Historic district or HOA design review can also restrict panel profile and color choices. Requirements vary, so always verify with the Savannah building or planning department before starting your project. For documentation or to schedule an inspection, contact us.
Ready to get started? Savannah Metal Roofing serves in Savannah and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Savannah · Response within 24h · No commitment · ☎ (912) 468-1649
Your Free Quote Request